 Techstream

1.   Toyota TechStream,   Techstream_Setup_V15.00.026.exe.
2.     TSRegistration.exe.    .

  K-Line ( VAG-COM 409.1), VAG K+CAN Commander 1.4.

1.   TechStream   KLine ( VAG-COM), VAG K+CAN Commander 1.4,    USB-COM,   .        .

2.   J2534KCANv1.0.0.10     C:\Program Files\Toyota Diagnostics\Techstream\. 

3. ,        j2534KCAN.exe  .

4.     COM-    - KLine, VAG K+CAN    ""  "".

5.  TechStream,  Setup->VIM Select  "J2534 (04.04) K+CAN Driver".

6.  ;)

P.S.       FT232BQ, FT232RL (   ..).      -   COM-KLine.    FT232      -    16 ( )  10.   K-Line        . 
     .     dTiniL/dTiniH -    Fast-.    +-5 ( -).        (j2534KCAN.exe).
 CAN  ISO-15765    STmin  BS    dSTmin  dBS  .  ,        .
 !
       FTDI (  K+CAN Commander 1.4   ),
     J2534KCANv1.0.0.10\FTDI.    
    FTDI  !


  Mini-VCI (          )

1.   TechStream   Mini-VCI (  Mongoose, Mangoose  ..   )     MiniVCI
   C.

2.      USB        C:\MiniVCI\FTDI\.

3.    USB-COM (. ),    setup.exe   C:\MiniVCI\    
  Passthru    "".

4.  TechStream,  Setup->VIM Select  "XHorce - MVCI".

5.  ,     Passthru   TechStream   VIM   "Detail".



Upcoming changes to history
Translation history will soon only be available when you are signed in and will be centrally managed within My Activity. Past history will be cleared during this upgrade, so make sure to save translations you want to remember for ease of access later.
Got it
Ustanovka Techstream

1. Ustanavlivayem programmu Toyota TechStream, zapustiv fayl Techstream_Setup_V15.00.026.exe.
2. Zapuskayem fayl registratsii programmy TSRegistration.exe. Sleduyem instruktsiyam etoy programmy.

Ustanovka adaptera K-Line (Naprimer VAG-COM 409.1), VAG K+CAN Commander 1.4.

1. Dlya raboty TechStream s adapterom KLine (naprimer VAG-COM), VAG K+CAN Commander 1.4, neobkhodimo ustanovit' drayver USB-COM, ot etogo adaptera. Obychno on idet s diskom dlya dannogo adaptera.

2. Skopiruyte papku J2534KCANv1.0.0.10 iz arkhiva v papku C:\Program Files\Toyota Diagnostics\Techstream\. 

3. Daleye, zaydite v skopirovannuyu papku i zapustite fayl j2534KCAN.exe pod administratorom.

4. V nastroykakh programmy vyberite COM-port adaptera i tip - KLine, VAG K+CAN i nazhmite knopku "Zapisat'" i "Vykhod".

5. Zapustite TechStream, v Setup->VIM Select vyberite "J2534 (04.04) K+CAN Driver".

6. Pol'zuyemsya ;)

P.S. Po poslednim dannym rabotayet s chipom FT232BQ, FT232RL (naprimer masterkit ili t.p.). Takzhe dolzhen zarabotat' s zheleznym kom-portom i adapterom COM-KLine. Dlya adapterov chipami FT232 polezno umen'shit' v nastroykakh drayvera kom-porta zaderzhku priyema s 16ms (po umolchaniyu) na 10ms. Ostal'nyye adaptery K-Line ne ispytyvalis' i poetomu s nimi vozmozhny problemy. 
S nekotorymi blokami vozmozhny problemy soyedineniya. Togda neobkhodimo podbirat' nastroyki dTiniL/dTiniH - chto yavlyayetsya korrektirovkami Fast-impul'sa. Regulirovka ne boleye +-5ms (obychno -). Korrektirovka nastroyek osushchestvlyayetsya v konfiguratore moyego drayvera (j2534KCAN.exe).
Dlya CAN protokola ISO-15765 vozmozhna regulirovka parametrov STmin i BS s pomoshch'yu nastroyek dSTmin i dBS v konfiguratore. Regulirovka neobkhodima, yesli prisutstvuyut problemy pri obmene po dannomu protokolu.
Vazhnoye zamemchaniye!
Pri ispol'zovanii kitayskikh adapterov na osnove chipa FTDI (naprimer adapter K+CAN Commander 1.4 na takom chipe),
rekomenduyu ustanovit' drayvera iz papki J2534KCANv1.0.0.10\FTDI. Posledniye ofitsial'nyye drayvera 
s bol'shinstvom kitayskikh chipov FTDI ne rabotayut!


Ustanovka adaptera Mini-VCI (V dannom arkhive prisutstvuyut vse sushchestvuyushchiye versii drayverov dlya dannogo adaptera)

1. Dlya raboty TechStream s adapterom Mini-VCI (on zhe Mongoose, Mangoose i t.d. vobshchem iz kitaya) neobkhodimo papku iz arkhiva MiniVCI
razarkhivirovat' na disk C.

2. Vtykayem adapter v svobodnyy slot USB i na zapros ustanovki drayverov ukazyvayem put' C:\MiniVCI\FTDI\.

3. Posle ustanovki drayverov USB-COM (p. vyshe), neobkhodimo zapustit' fayl setup.exe iz papki C:\MiniVCI\ i vybrat' odnu iz
versiy drayverov Passthru i nazhat' knopku "Vybrat'".

4. Zapustite TechStream, v Setup->VIM Select vyberite "XHorce - MVCI".

5. Pri neokhodimosti, mozhno smenit' versiyu drayvera Passthru pryamo v TechStream v punkte VIM nazhav knopku "Detail".
Show more
2766/5000
Techstream Installation

1. Install the Toyota TechStream program by running the Techstream_Setup_V15.00.026.exe file.
2. Run the registration file of the program TSRegistration.exe. Follow the instructions of this program.

Installing the K-Line adapter (e.g. VAG-COM 409.1), VAG K + CAN Commander 1.4.

1. For TechStream to work with the KLine adapter (for example VAG-COM), VAG K + CAN Commander 1.4, you need to install the USB-COM driver from this adapter. Usually it comes with a disk for this adapter.

2. Copy the J2534KCANv1.0.0.10 folder from the archive to the C: \ Program Files \ Toyota Diagnostics \ Techstream \ folder.

3. Next, go to the copied folder and run the j2534KCAN.exe file under the administrator.

4. In the program settings, select the adapters COM port and the type is KLine, VAG K + CAN and click the "Write" and "Exit" button.

5. Launch TechStream, in Setup-> VIM Select select "J2534 (04.04) K + CAN Driver".

6. We use;)

P.S. According to the latest data, it works with the FT232BQ, FT232RL chip (for example, a master kit or the like). It should also work with an iron com port and a COM-KLine adapter. For adapters with FT232 chips, it is useful to reduce the reception delay in the com port driver settings from 16ms (default) to 10ms. The rest of the K-Line adapters have not been tested and therefore problems are possible with them.
With some blocks, connection problems are possible. Then it is necessary to select the dTiniL / dTiniH settings - which are adjustments to the Fast pulse. Adjustment no more than + -5ms (usually -). Adjustment of settings is carried out in the configurator of my driver (j2534KCAN.exe).
For CAN protocol ISO-15765, the parameters STmin and BS can be adjusted using the dSTmin and dBS settings in the configurator. Adjustment is necessary if there are problems during the exchange according to this protocol.
Important charm!
When using Chinese adapters based on the FTDI chip (for example, the K + CAN Commander 1.4 adapter on such a chip),
I recommend installing drivers from the J2534KCANv1.0.0.10 \ FTDI folder. Latest official drivers
Most Chinese FTDI chips do not work!


Installing the Mini-VCI adapter (This archive contains all existing driver versions for this adapter)

1. To work with TechStream adapter Mini-VCI (aka Mongoose, Mangoose, etc. in general from China), you need a folder from the MiniVCI archive
unzip to drive C.

2. We stick the adapter into a free USB slot and indicate the path C: \ MiniVCI \ FTDI \ on the driver installation request.

3. After installing the USB-COM drivers (above), you need to run the setup.exe file from the folder C: \ MiniVCI \ and select one of
Passthru driver versions and click the "Select" button.

4. Launch TechStream, in Setup-> VIM Select select "XHorce - MVCI".

5. If necessary, you can change the version of the Passthru driver directly in TechStream in the VIM item by clicking the "Detail" button.
Send feedback
History
Saved
Community


