Mut 3 Software with MINI VCI J2534 Interface

[chrisspajero]

Hello I would like to read my ABS DTC´s with the MUT3 software.
I have the software running on a virtual Win 7 machine.

I have bought a MINI VCI J2534 adapter.
I think this is this Toyota Techstream variant

The MUT3 software starts but when reading always shows fail VCI Lite Kommunication.

Where do I set the MUT3 software to use the MINI VCI J2534 interface.

In the device manager it shows USB controller composite device.

The car is a Pajero V80 Long Bj.2010
3.2 DI

I have problems with the ABS that the pump does not switch off and shows errors and there is a strange squeaking noise on the ABS.

Am grateful for any tips and tricks.

Greetings from Germany

Chriss

[kolyandex]

Hi. See schematics, where goes wires from abs to diagnosis connector first.

[chrisspajero]

Hello how do you mean that I have checked the cables from the ABS master cylinder.
To the ABS control unit in the interior.

Which cable do you mean to the diagnostic plug?

[kolyandex]

From abs ecu to obd connector.