Mut 3 Software with MINI VCI J2534 Interface

Soft for editing coding files. Hidden options of Mitsubishi.

Moderator: Bad-Teo

Post Reply
chrisspajero
Posts: 2
Joined: 20 Feb 2022, 10:11

Mut 3 Software with MINI VCI J2534 Interface

Post by chrisspajero » 20 Feb 2022, 11:05

Hello I would like to read my ABS DTC´s with the MUT3 software.
I have the software running on a virtual Win 7 machine.

I have bought a MINI VCI J2534 adapter.
I think this is this Toyota Techstream variant

The MUT3 software starts but when reading always shows fail VCI Lite Kommunication.

Where do I set the MUT3 software to use the MINI VCI J2534 interface.

In the device manager it shows USB controller composite device.

The car is a Pajero V80 Long Bj.2010
3.2 DI

I have problems with the ABS that the pump does not switch off and shows errors and there is a strange squeaking noise on the ABS.

Am grateful for any tips and tricks.

Greetings from Germany

Chriss

User avatar
kolyandex
Администратор
Posts: 1287
Joined: 08 Dec 2019, 13:33
Location: Novosibirsk
Contact:

Re: Mut 3 Software with MINI VCI J2534 Interface

Post by kolyandex » 20 Feb 2022, 11:38

Hi. See schematics, where goes wires from abs to diagnosis connector first.
In backup we trust.

chrisspajero
Posts: 2
Joined: 20 Feb 2022, 10:11

Re: Mut 3 Software with MINI VCI J2534 Interface

Post by chrisspajero » 20 Feb 2022, 12:13

Hello how do you mean that I have checked the cables from the ABS master cylinder.
To the ABS control unit in the interior.

Which cable do you mean to the diagnostic plug?

User avatar
kolyandex
Администратор
Posts: 1287
Joined: 08 Dec 2019, 13:33
Location: Novosibirsk
Contact:

Re: Mut 3 Software with MINI VCI J2534 Interface

Post by kolyandex » 20 Feb 2022, 13:21

From abs ecu to obd connector.
In backup we trust.

Post Reply