Mut 3 Software with MINI VCI J2534 Interface
Posted: 20 Feb 2022, 11:05
Hello I would like to read my ABS DTC´s with the MUT3 software.
I have the software running on a virtual Win 7 machine.
I have bought a MINI VCI J2534 adapter.
I think this is this Toyota Techstream variant
The MUT3 software starts but when reading always shows fail VCI Lite Kommunication.
Where do I set the MUT3 software to use the MINI VCI J2534 interface.
In the device manager it shows USB controller composite device.
The car is a Pajero V80 Long Bj.2010
3.2 DI
I have problems with the ABS that the pump does not switch off and shows errors and there is a strange squeaking noise on the ABS.
Am grateful for any tips and tricks.
Greetings from Germany
Chriss
I have the software running on a virtual Win 7 machine.
I have bought a MINI VCI J2534 adapter.
I think this is this Toyota Techstream variant
The MUT3 software starts but when reading always shows fail VCI Lite Kommunication.
Where do I set the MUT3 software to use the MINI VCI J2534 interface.
In the device manager it shows USB controller composite device.
The car is a Pajero V80 Long Bj.2010
3.2 DI
I have problems with the ABS that the pump does not switch off and shows errors and there is a strange squeaking noise on the ABS.
Am grateful for any tips and tricks.
Greetings from Germany
Chriss