Abilities
Full support for CAN bus vehicles (diag/service/software updates)
Full support for k-line vehicles (diag/service/software updates)
Lear/Continental ETACS factory reset
Immo VIN change
OSS/ESL ECU VIN change
Original engine ECU vin change (for some)
DTC ignoring for coding save possible
Dashboards Read/write EEPROM, ECUs flasher viewtopic.php?f=14&t=281
------------
Better than original VCI:
Small size
Up to 2-10 times faster
4-10 times cheaper (depends on version)
Has additional features, which original software hasn't
Abilities and limitations
Abilities and limitations
In backup we trust.
Re: Abilities and limitations
Limitations
No support for vehicles, which original VCI-lite not supported (older 2000)
------------------------------------
From MUT-3 manual
VCI-Lite not support following functions:
・Communication system except K-line/CAN
・SWS monitor
・Simulated vehicle speed
No support for vehicles, which original VCI-lite not supported (older 2000)
------------------------------------
From MUT-3 manual
VCI-Lite not support following functions:
・Communication system except K-line/CAN
・SWS monitor
・Simulated vehicle speed
In backup we trust.
Re: Abilities and limitations
Hi
I am wondering why there is no programming via k line?
Is it a hardware or software issue?
I have tried k line programming and it brings up a voltage error even when I have gone up to 16 volts .
Thanks Brendan.
I am wondering why there is no programming via k line?
Is it a hardware or software issue?
I have tried k line programming and it brings up a voltage error even when I have gone up to 16 volts .
Thanks Brendan.
Re: Abilities and limitations
tôi muốn tải phần mềm về máy tính
Re: Abilities and limitations
will this work with Carisma models ? it has slow KWP protocols...