FAQ in english

All about MUT driver
Все о драйвере MUT
Cam Code
Posts: 9
Joined: 04 Jan 2022, 12:07

Re: FAQ in english

Post by Cam Code » 17 Apr 2022, 17:55

Hi why can't I view the service manuals do I need to download those separately?

User avatar
kolyandex
Администратор
Posts: 1287
Joined: 08 Dec 2019, 13:33
Location: Novosibirsk
Contact:

Re: FAQ in english

Post by kolyandex » 18 Apr 2022, 01:48

Yep
In backup we trust.

harre
Posts: 9
Joined: 02 Jan 2022, 23:27

Re: FAQ in english

Post by harre » 29 Apr 2022, 09:06

kolyandex wrote:
05 Jan 2022, 06:29
Simple will work for engine/transmission/possible ABS. See schematics diagram. All ECUs on CAN-bus (6,14 pin OBD) will work with simple, other needs full version and original tactrix.
Can you elabolarate more about ABS support? Does "possible" means it may require "full" version, or it may fail due to limitation in any version.

User avatar
kolyandex
Администратор
Posts: 1287
Joined: 08 Dec 2019, 13:33
Location: Novosibirsk
Contact:

Re: FAQ in english

Post by kolyandex » 29 Apr 2022, 10:48

See schematic diagram. If abs use pin 7 in obd means need to use full driver version. If 6 and 14 simple is enough.
In backup we trust.

maguro
Posts: 3
Joined: 09 May 2022, 08:06

Re: FAQ in english

Post by maguro » 09 May 2022, 10:02

I wrote it in Russian by mistake, so I reprinted it here.
MUT-3 J2534 Full Driver Where do I download it from?
I also purchased a USB dongle.

Daveopaj
Posts: 5
Joined: 30 May 2022, 09:14

Re: FAQ in english

Post by Daveopaj » 30 May 2022, 09:21

Hi where are you located? If Russia how do I pay you with what's going on?

User avatar
kolyandex
Администратор
Posts: 1287
Joined: 08 Dec 2019, 13:33
Location: Novosibirsk
Contact:

Re: FAQ in english

Post by kolyandex » 31 May 2022, 04:20

Hi. Mail me iam@kolyandex.su
In backup we trust.

coltracer
Posts: 3
Joined: 29 Jun 2022, 13:14

Re: FAQ in english

Post by coltracer » 07 Jul 2022, 09:21

Hi, I just purchased the full driver version, trying to communicate with a 2002 Galant V6. Engine ECU works fine, Immo works too. No 4AT, no ABS, no SRS, no AC, no cruise. No difference between MUT-III and MUT-III SE.

I traced through all schematics and came to this pinout of the OBD2-Connector:

1: Engine, 4AT, ABS, AC, Immo
4: GND
5: GND
7: Engine, 4AT, ABS, SRS, Immo
11: AC
13: Cruise
14: Cruise
16: +12V

OK, I understand Cruise and AC won't work, because they're not on Pin 7, correct?
What about 4AT, ABS and SRS? They are all on Pin 7 and Pin 1. Does that mean I have to ground Pin 1 for them to go into diagnostics mode? Or does my tactrix openport 2.0 clone do that for me?

User avatar
kolyandex
Администратор
Posts: 1287
Joined: 08 Dec 2019, 13:33
Location: Novosibirsk
Contact:

Re: FAQ in english

Post by kolyandex » 07 Jul 2022, 09:50

Not sure about clone. Short to ground manually.
In backup we trust.

coltracer
Posts: 3
Joined: 29 Jun 2022, 13:14

Re: FAQ in english

Post by coltracer » 11 Jul 2022, 11:53

Was just about to try shorting Pin 1 to ground, openport 2.0 clone just died. won't light up anymore. seems to happen a lot. Oh well, time to buy a real one....

Post Reply