FAQ in english

All about MUT driver
Все о драйвере MUT
jakuszoli
Posts: 4
Joined: 06 May 2020, 19:11

Re: FAQ in english

Post by jakuszoli » 19 May 2020, 12:17

Hello.
I have a question. Does the MUT III work with VXDIAG NANO device (of course with the driver bought from here)?
I have it for Mazda/Ford types, but it has a J2534 driver, and I thought that I do not have to buy another device, if it is compatible.

Thanks for the answers in advance.

User avatar
kolyandex
Администратор
Posts: 1287
Joined: 08 Dec 2019, 13:33
Location: Novosibirsk
Contact:

Re: FAQ in english

Post by kolyandex » 19 May 2020, 12:22

jakuszoli wrote:
19 May 2020, 12:17
Hello.
I have a question. Does the MUT III work with VXDIAG NANO device (of course with the driver bought from here)?
I have it for Mazda/Ford types, but it has a J2534 driver, and I thought that I do not have to buy another device, if it is compatible.

Thanks for the answers in advance.
CAN-bus vehicles 100%, old k-line vehicles with no warranties, OBD only, i think.
In backup we trust.

jakuszoli
Posts: 4
Joined: 06 May 2020, 19:11

Re: FAQ in english

Post by jakuszoli » 19 May 2020, 22:04

Thank you for your quick reply.
I have a 2014 Outlander Phev. Which driver do I need to buy from you for this type?
Is it possible to update the wifi module with the MUT III?

User avatar
kolyandex
Администратор
Posts: 1287
Joined: 08 Dec 2019, 13:33
Location: Novosibirsk
Contact:

Re: FAQ in english

Post by kolyandex » 20 May 2020, 08:29

jakuszoli wrote:
19 May 2020, 22:04
Thank you for your quick reply.
I have a 2014 Outlander Phev. Which driver do I need to buy from you for this type?
Is it possible to update the wifi module with the MUT III?
Second version can do all, except reprogramming. I’m not recommend update wifi ecu, because it can die. Info from Official service bulletin Mitsubishi.
In backup we trust.

jakuszoli
Posts: 4
Joined: 06 May 2020, 19:11

Re: FAQ in english

Post by jakuszoli » 20 May 2020, 09:28

Thanks. I sent you 60usd from paypal email ***li83@gmail.com.

Please let me know what to do nowy

User avatar
kolyandex
Администратор
Posts: 1287
Joined: 08 Dec 2019, 13:33
Location: Novosibirsk
Contact:

Re: FAQ in english

Post by kolyandex » 20 May 2020, 10:02

jakuszoli wrote:
20 May 2020, 09:28
Thanks. I sent you 60usd from paypal email ***li83@gmail.com.

Please let me know what to do nowy
Check mail
In backup we trust.

jakuszoli
Posts: 4
Joined: 06 May 2020, 19:11

Re: FAQ in english

Post by jakuszoli » 20 May 2020, 10:14

I wrote you private message.

kernel
Posts: 12
Joined: 08 May 2020, 16:55

Re: FAQ in english

Post by kernel » 22 May 2020, 08:16

@kolyandex

I followed the process of programming a new key and seemed like all executed well. However, the key does not start the vehicle. Is there a way I can disable the immobilizer to test to see if its and issue with the key programming or is there somewhere I can see if the resistance is being seen by the key? please advise.

User avatar
kolyandex
Администратор
Posts: 1287
Joined: 08 Dec 2019, 13:33
Location: Novosibirsk
Contact:

Re: FAQ in english

Post by kolyandex » 22 May 2020, 08:40

kernel wrote:
22 May 2020, 08:16
@kolyandex

I followed the process of programming a new key and seemed like all executed well. However, the key does not start the vehicle. Is there a way I can disable the immobilizer to test to see if its and issue with the key programming or is there somewhere I can see if the resistance is being seen by the key? please advise.
Any errors in engine ECU and immo present now? Immo can't be disabled.
In backup we trust.

kernel
Posts: 12
Joined: 08 May 2020, 16:55

Re: FAQ in english

Post by kernel » 22 May 2020, 15:48

kolyandex wrote:
22 May 2020, 08:40
kernel wrote:
22 May 2020, 08:16
@kolyandex

I followed the process of programming a new key and seemed like all executed well. However, the key does not start the vehicle. Is there a way I can disable the immobilizer to test to see if its and issue with the key programming or is there somewhere I can see if the resistance is being seen by the key? please advise.
Any errors in engine ECU and immo present now? Immo can't be disabled.
Only errors are asc systm issue and 4wd issue, However those errors were there before key programming. Is there an option in the MUT III to check to see if the key is present and working? should I try programming again? just not sure if that will work as it would be considered a used key now and it would be able to be reprogrammed, or am I incorrect?

Post Reply