FAQ in english

All about MUT driver
Все о драйвере MUT
Post Reply
User avatar
kolyandex
Администратор
Posts: 1287
Joined: 08 Dec 2019, 13:33
Location: Novosibirsk
Contact:

FAQ in english

Post by kolyandex » 19 Dec 2019, 08:39

OS support
7/8/10 x86/x64

Supported adapters:

Tactrix OpenPort 2.0 (original) — full support (chinese clones also working, but no warranties)
ScanDoc Compact (J2534) — full support
Scanmatik 2/2 Pro — full support
Toyota Mini-VCI — support only CAN vehicles with limitations (can't write long ECU coding, can’t reprogramming, can’t work with dash eeprom). Only for Simple version. Driver for Mini-VCI
Other J2534 adapters — if it fully supports J2534 - Full CAN vehicles support, partially support for k-line vehicles. Not work with ECUs, where used pin 1 in OBD*
* If you have good and expensive J2534 adapter, for old cars diagnostics need to manually short to groung pin 1 in OBD jack, for turning on diagnosis mode.
Versions:

Simple
— Only CAN bus ECUs and vehicles (about 2005+), without reprogramming, without k-line.
— Licensing - binding to one PC without abilities to use virtual machines.


Full
Full, without limitaions.
— CAN
— k-line (OBD, ISO-MMC, KWP) only on pin 7 (look schematics diagram). ~ before 2000 year vehicles not working. (limitation of original VCI-Lite)
— CAN bus ECUs reprogramming. Vehicles list
Additional features (unavailable in MUT-3):
— Lear/Continental ETACS factory reset
— Immo/KOS/Keyless/FAST VIN change
— OSS/ESL ECU VIN change
— Original engine ECU vin change (for some)
Licensing - binding to one PC without abilities to use virtual machines OR USB-dongle without any limitations.

Which version do i need?

Exhaust sensors graph (Lancer X/ASX/Outlander 3/XL) - Simple
Read and erase errors (DTC) (Lancer X/ASX/Outlander 3/XL) — viewforum.php?f=7 or Simple.
Calibration of camera/radar (Outlander 3) — Simple.
Fill AYC/ACD (Evo X) — Simple.
Register new immo keys — CAN bus — Simple, k-line — Full.
Edit engine/ETACS coding — viewforum.php?f=7 or Simple.
Update ABS/ETACS/Engine/other ECU firmware — Full.
Old vehicles diagnostics (Lancer 9 / Pajero 3 / Outlander 1/ Lancer Cedia) — Full.
Replace used Immo — Full.
TC-SST teach-in procedure - Simple.
DBCAM reset procedure on PHEV - Simple.
Reading/Writing ECUs memory - flasher viewtopic.php?f=14&t=281

Price:
Simple: 60 USD
Full: 150 USD

Purchase
ECUTools https://ecutools.eu/catalog/?ProductsFi ... ands%5D=60
or
iam@kolyandex.su
Boosty https://boosty.to/kolyandex
In backup we trust.

Best36512
Posts: 1
Joined: 05 Apr 2020, 02:05

Re: FAQ in english

Post by Best36512 » 05 Apr 2020, 02:12

Do you have whatapps ??

i want contact you

Thank you

User avatar
kolyandex
Администратор
Posts: 1287
Joined: 08 Dec 2019, 13:33
Location: Novosibirsk
Contact:

Re: FAQ in english

Post by kolyandex » 05 Apr 2020, 02:15

Best36512 wrote:
05 Apr 2020, 02:12
Do you have whatapps ??

i want contact you

Thank you
Mail me iam@kolyandex.su or iam@forum.kolyandex.su
In backup we trust.

kernel
Posts: 12
Joined: 08 May 2020, 16:55

Re: FAQ in english

Post by kernel » 14 May 2020, 02:33

@kolyandex

How do I purchase the one that will allow me to program keys to my 2015 lancer evo with my tactrix cable? From what I learned mmcoding writer will change vin on the ecu correct? keys were lost and ecu is fried, I ordered replacements, but still need to programed and vin coded. Please advise.

Thank you

User avatar
kolyandex
Администратор
Posts: 1287
Joined: 08 Dec 2019, 13:33
Location: Novosibirsk
Contact:

Re: FAQ in english

Post by kolyandex » 14 May 2020, 03:59

kernel wrote:
14 May 2020, 02:33
@kolyandex

How do I purchase the one that will allow me to program keys to my 2015 lancer evo with my tactrix cable? From what I learned mmcoding writer will change vin on the ecu correct? keys were lost and ecu is fried, I ordered replacements, but still need to programed and vin coded. Please advise.

Thank you
Hi. Second version can program keys, also you can change vin via mut. Notice: used keys can only be programmed in their immo.

My PayPal: https://www.paypal.me/kolyandex
In backup we trust.

kernel
Posts: 12
Joined: 08 May 2020, 16:55

Re: FAQ in english

Post by kernel » 14 May 2020, 04:52

kolyandex wrote:
14 May 2020, 03:59
kernel wrote:
14 May 2020, 02:33
@kolyandex

How do I purchase the one that will allow me to program keys to my 2015 lancer evo with my tactrix cable? From what I learned mmcoding writer will change vin on the ecu correct? keys were lost and ecu is fried, I ordered replacements, but still need to programed and vin coded. Please advise.

Thank you
Hi. Second version can program keys, also you can change vin via mut. Notice: used keys can only be programmed in their immo.

My PayPal: https://www.paypal.me/kolyandex
This is a brand new key so I shouldn't have any issues correct? Would there be any benefit in me buying the 3rd tier for my evo or any other cars? Once I purchase your software I just load it up with the mut software and follow instructions for programming?

Thank you I am ready to send the money via paypal services and your help is greatly appreciated.

User avatar
kolyandex
Администратор
Posts: 1287
Joined: 08 Dec 2019, 13:33
Location: Novosibirsk
Contact:

Re: FAQ in english

Post by kolyandex » 14 May 2020, 05:18

New key is ok.
3rd version supports old cars and reprogramming, as example update for tc-sst. Instructions in service manual, but keys programming so simple and manual not need.
In backup we trust.

kernel
Posts: 12
Joined: 08 May 2020, 16:55

Re: FAQ in english

Post by kernel » 14 May 2020, 05:56

kolyandex wrote:
14 May 2020, 05:18
New key is ok.
3rd version supports old cars and reprogramming, as example update for tc-sst. Instructions in service manual, but keys programming so simple and manual not need.
sounds great sending you the payment now, please let me know if there is anything additional I need. Also if there are any videos showing the programming would be awesome.

Payment sent, feel free to email my paypal information with details.

User avatar
kolyandex
Администратор
Posts: 1287
Joined: 08 Dec 2019, 13:33
Location: Novosibirsk
Contact:

Re: FAQ in english

Post by kolyandex » 14 May 2020, 08:20

Check mail
In backup we trust.

Driver102
Posts: 6
Joined: 10 May 2020, 11:08

Re: FAQ in english

Post by Driver102 » 16 May 2020, 11:02

Hello, what version of the VCI-Lite emulator i need, to reprogramming the immo ( keys ) on the M-Colt cz30 with MUT 3 and Tactrix is the v.2 ok ??

Post Reply