Page 1 of 1
FOB Registration 2015 lancer evo
Posted: 18 Nov 2020, 07:44
by kernel
Can anyone provide exact instructions on how to program the diamond shaped FOB on a 2015 Lancer evolution. This is not the fast key, its a key with the fob at the end of it. I have purchased the VCI driver and was successful in programing a key however the diamond FOB is what I have not had success with. Any help is greatly appreciated.
Re: FOB Registration 2015 lancer evo
Posted: 18 Nov 2020, 07:47
by kolyandex
New or used key?
Re: FOB Registration 2015 lancer evo
Posted: 18 Nov 2020, 08:35
by kernel
brand new key with brand new fob
Re: FOB Registration 2015 lancer evo
Posted: 18 Nov 2020, 08:48
by kolyandex
Now you have working FAST key and need to program additional fob key, right?
Re: FOB Registration 2015 lancer evo
Posted: 18 Nov 2020, 19:00
by kernel
I dont have a fast key, I have the standard one (see url). I successfully programmed the key part(immo to start the car) but I cant find instructions on how to program the fob part(diamond side of key).
This URL shows the type of key I have.
https://www.locksmithkeyless.com/produc ... g8d-625m-a
Re: FOB Registration 2015 lancer evo
Posted: 19 Nov 2020, 08:53
by kolyandex
Does your IMMO supports KES functions for buttons on key?
Re: FOB Registration 2015 lancer evo
Posted: 20 Nov 2020, 05:10
by kernel
I figured it out, there was a combination that needed to be completed on the fob while programming with keyless ID reg in MUTS software.
Re: FOB Registration 2015 lancer evo
Posted: 09 Jan 2021, 20:11
by hakim_md
kolyandex wrote: ↑18 Nov 2020, 07:47
New or used key?
Can reused registered key?