Toyota MVCI J2534 cable driver how to get it working

All about MUT driver
Все о драйвере MUT
Post Reply
RobOutlander
Posts: 2
Joined: 06 Dec 2020, 23:06

Toyota MVCI J2534 cable driver how to get it working

Post by RobOutlander » 10 Dec 2020, 22:34

Hello from Canada.
I know this topic has surely been covered in previous posts. But I'm having lots of trouble getting the mvci j2534 cable to populate in the connection settings because I don't have a driver. I used to use etacs decoder to disable my TPMS in winter with different winter wheels. But I can't use decoder anymore and this seem like very good software.

Can someone point me in the right direction how to get the mvci j2534 cable and mm software setup in windows10 64bit for an outlander.

Thanks for all the advice and help.

Also I still have the actia lexia tool but could not get that working either. I dont want to waste people's just if you can point me in the right direction.

User avatar
kolyandex
Администратор
Posts: 1287
Joined: 08 Dec 2019, 13:33
Location: Novosibirsk
Contact:

Re: Toyota MVCI J2534 cable driver how to get it working

Post by kolyandex » 11 Dec 2020, 02:18

Instruction (mini vci driver also there) viewtopic.php?f=6&t=82
Lexia driver viewforum.php?f=17
MMCodingwriter dowmload page viewtopic.php?f=15&t=3
In backup we trust.

vson1977
Posts: 2
Joined: 25 Nov 2020, 13:01

Re: Toyota MVCI J2534 cable driver how to get it working

Post by vson1977 » 12 Dec 2020, 10:06

i installed mini-vci driver from link above, but my comp still dont see it... i have windows 10 x64

RobOutlander
Posts: 2
Joined: 06 Dec 2020, 23:06

Re: Toyota MVCI J2534 cable driver how to get it working

Post by RobOutlander » 12 Dec 2020, 14:53

Thanks for your help everyone. :)

vson1977
Posts: 2
Joined: 25 Nov 2020, 13:01

Re: Toyota MVCI J2534 cable driver how to get it working

Post by vson1977 » 12 Dec 2020, 16:22

RobOutlander wrote:
12 Dec 2020, 14:53
Thanks for your help everyone. :)
have you finally managed to activate your cable J2534? i installed driver to windows 10 but still connection is not recognized...

Post Reply