Discussion and questions

[kolyandex]

Chose update file manually (right bottom button)
viewtopic.php?t=137

[praka1]

Witam. Prosze o pomoc , jak wlaczyc tryb EV w Outlander PHEV 2018 aby byl wlaczony na stale przy kazdym odpalaniu samochodu . Czy da rade za pomoca MMcodingwriter?

[bonwal007]

Hi, how to download the flasher? and what connector to use? thanks

[bg20]

Hi, I Need denso ECU programming counter reset

I need the same, counter was at 100 but did not flash 100 times, now unable to read or write. hope someone can give us insight on this.

***using pcm flash***
Interface: Tactrix Inc. - OpenPort 2.0 J2534 ISO/CAN/VPW/PWM
DLL: 1.02.4870 Feb 3 2017 23:36:05
Firmware: 1.17.4877
Protocol: Mitsubishi: Denso Diesel (SH7058/SH7058S/1MB SH7059/1.5MB SH72543/2MB)
Identification
Hardware: 1860B552
SW Version: 1860B55203
Calibration: 131300
Protocol: Denso SH7058
VIN: MMBGNKH40BF017957
CVN: 6C441D80
Reprog count: 100
Completed

Interface: Tactrix Inc. - OpenPort 2.0 J2534 ISO/CAN/VPW/PWM
DLL: 1.02.4870 Feb 3 2017 23:36:05
Firmware: 1.17.4877
Protocol: Mitsubishi: Denso Diesel (SH7058/SH7058S/1MB SH7059/1.5MB SH72543/2MB)
Initialization
Entering reprogramming mode
Failure

*****using mmc flash*****
[Adapter name] Tactrix Inc. - OpenPort 2.0 J2534 ISO/CAN/VPW/PWM
[Firmware version] 1.17.4877
[Dll version] 1.01.4247 Apr 18 2014 16:14:11
[23:27:14] Engine part number: 1860B552
[23:27:14] Software: 1860B55203
[23:27:14] VIN: MMBGNKH40BF017957

[Adapter name] Tactrix Inc. - OpenPort 2.0 J2534 ISO/CAN/VPW/PWM
[Firmware version] 1.17.4877
[Dll version] 1.01.4247 Apr 18 2014 16:14:11
[23:27:16] Engine part number: 1860B552
[23:27:17] Software: 1860B55203
[23:27:17] VIN: MMBGNKH40BF017957
[23:27:17] Error: Communication error, code: 010C000007E87F1022

Please help

[OutlanderMatt]

Hello, I need Mitsubishi Outlander and MiEV EV Flasher for changing Battery Capacity for upgraded pack size. I have upgraded my Oulander pack from 40Ah to 58Ah and would like to flash the BMU/ECU etc to accommodate this.

I am also looking to provide this upgrade to my customers. I am not sure if I will flash their ECU as that makes me liable in the future so I might just flash mine only.

I would also be happy to pay for each customer that I upgrade as I will be selling this service. Maybe I can pay to have custom Firmware written for my upgrade Pack (58Ah) with new degredation curves etc and I will use the same batteries in every upgrade.

I would like to purchase Flasher for my vehicle for Mistubishi EV and then we could work on a solution for my customers also.

Thank you and look forward to your reply

[bonwal007]

Hello can you use tactrix openport clone copy to reflash mitsubishi mirage? the one with black pcb.

[Kris0075]

Hi this is my problem mitsubishi outlander phev 2018

17216375033178492283611067613506.jpg

17216374639184646077939504659856.jpg

my car was after accident

17216374639184646077939504659856.jpg

help!!! thanks

[barkl]

Hi this is my problem mitsubishi outlander phev 2018...

The ETACS control unit outputs diagnostic code number B1A24 if the ignition key identifier is not registered in the ETACS unit, or a key registered behind another car is used.
VIN?