edzeduardo wrote: ↑01 Dec 2020, 01:51
Hi, I Need denso ECU programming counter reset
I need the same, counter was at 100 but did not flash 100 times, now unable to read or write. hope someone can give us insight on this.
***using pcm flash***
Interface: Tactrix Inc. - OpenPort 2.0 J2534 ISO/CAN/VPW/PWM
DLL: 1.02.4870 Feb 3 2017 23:36:05
Firmware: 1.17.4877
Protocol: Mitsubishi: Denso Diesel (SH7058/SH7058S/1MB SH7059/1.5MB SH72543/2MB)
Identification
Hardware: 1860B552
SW Version: 1860B55203
Calibration: 131300
Protocol: Denso SH7058
VIN: MMBGNKH40BF017957
CVN: 6C441D80
Reprog count: 100
Completed
Interface: Tactrix Inc. - OpenPort 2.0 J2534 ISO/CAN/VPW/PWM
DLL: 1.02.4870 Feb 3 2017 23:36:05
Firmware: 1.17.4877
Protocol: Mitsubishi: Denso Diesel (SH7058/SH7058S/1MB SH7059/1.5MB SH72543/2MB)
Initialization
Entering reprogramming mode
Failure
*****using mmc flash*****
[Adapter name] Tactrix Inc. - OpenPort 2.0 J2534 ISO/CAN/VPW/PWM
[Firmware version] 1.17.4877
[Dll version] 1.01.4247 Apr 18 2014 16:14:11
[23:27:14] Engine part number: 1860B552
[23:27:14] Software: 1860B55203
[23:27:14] VIN: MMBGNKH40BF017957
[Adapter name] Tactrix Inc. - OpenPort 2.0 J2534 ISO/CAN/VPW/PWM
[Firmware version] 1.17.4877
[Dll version] 1.01.4247 Apr 18 2014 16:14:11
[23:27:16] Engine part number: 1860B552
[23:27:17] Software: 1860B55203
[23:27:17] VIN: MMBGNKH40BF017957
[23:27:17] Error: Communication error, code: 010C000007E87F1022
Please help