Dashboards instruction / Инструкция по работе с приборками

Mitsubishi ECU flasher
Флешер ЭБУ Mitsubishi
sayed_khlaaf
Posts: 3
Joined: 18 Feb 2020, 21:50

Re: Dashboards instruction / Инструкция по работе с приборками

Post by sayed_khlaaf » 15 Apr 2021, 23:47

Please explain with pictures How to change the meter reading to the value of 100 kilometers?
I made many attempts to follow the instructions in the discussion and I didn’t succeed
Thanks in advance.

User avatar
kolyandex
Администратор
Posts: 1287
Joined: 08 Dec 2019, 13:33
Location: Novosibirsk
Contact:

Re: Dashboards instruction / Инструкция по работе с приборками

Post by kolyandex » 16 Apr 2021, 00:28

All explained in first post here
In backup we trust.

sayed_khlaaf
Posts: 3
Joined: 18 Feb 2020, 21:50

Re: Dashboards instruction / Инструкция по работе с приборками

Post by sayed_khlaaf » 22 Apr 2021, 06:44

how to change from miles-km on Color screen upD70F3425 and black-white upD70F3421
ODO/miles-km

sayed_khlaaf
Posts: 3
Joined: 18 Feb 2020, 21:50

Re: Dashboards instruction / Инструкция по работе с приборками

Post by sayed_khlaaf » 22 Apr 2021, 06:44

how to change from miles-km on Color screen upD70F3425 and black-white upD70F3421
ODO/miles-km

User avatar
kolyandex
Администратор
Posts: 1287
Joined: 08 Dec 2019, 13:33
Location: Novosibirsk
Contact:

Re: Dashboards instruction / Инструкция по работе с приборками

Post by kolyandex » 22 Apr 2021, 06:46

Same as mb91f223
In backup we trust.

6b31tb
Posts: 6
Joined: 24 Apr 2020, 09:50

Re: Nippon Seiki MB91F223 instruction

Post by 6b31tb » 17 May 2021, 06:54

gniqu wrote:
17 Nov 2020, 02:44
Do some math can help to caculate the exact ODO
------------------------------------------------------------------
876C 7893 (FFFF-876C=7893)
806C 7F93 (FFFF-806C=7F93)

806C 7F93 HEX2DEC=4127+884736=888863 km

876C 7893 step 24 km
876C 7F93 step 1 km

ODO=888863+24+1=888888 km
------------------------------------------------------------------
can i trouble you please to expand on this, im having a hard time to wrap my mind around it.
here is an example
actual cluster has 211,891 kilometers on it, hex is D2192DE6
when put it 211891 into tacho soft it gives hex DD1922E6
when you write the tachosoft hex to the cluster the odometer says 211711, a difference of 180 kilometers , should say 211,891.

so how do we use maths to get the exact hex?

thanks

6b31tb
Posts: 6
Joined: 24 Apr 2020, 09:50

Re: Dashboards instruction / Инструкция по работе с приборками

Post by 6b31tb » 17 May 2021, 07:04

i think i figured it out
using this web site
https://www.rapidtables.com/convert/num ... o-hex.html

DD1922E6 convert to decimal 3709412070
D2192DE6 convert to decimal 3524865510
difference is 184,546,560

take 3709412070 and minus 184,546,560 gives us 3524865510
convert 3524865510 into hex using that site and we get D2192DE6
put D2192DE6 into cluster and we get the exact number we needed 211891

however, feel free to correct me if im wrong

User avatar
Bad-Teo
Posts: 275
Joined: 22 Dec 2019, 12:58
Location: Украина

Re: Dashboards instruction / Инструкция по работе с приборками

Post by Bad-Teo » 17 May 2021, 07:13

6b31tb wrote:
17 May 2021, 07:04
i think i figured it out
using this web site
https://www.rapidtables.com/convert/num ... o-hex.html

DD1922E6 convert to decimal 3709412070
D2192DE6 convert to decimal 3524865510
difference is 184,546,560

take 3709412070 and minus 184,546,560 gives us 3524865510
convert 3524865510 into hex using that site and we get D2192DE6
put D2192DE6 into cluster and we get the exact number we needed 211891

however, feel free to correct me if im wrong

The calculation is much more complicated than described above.

6b31tb
Posts: 6
Joined: 24 Apr 2020, 09:50

Re: Dashboards instruction / Инструкция по работе с приборками

Post by 6b31tb » 17 May 2021, 08:22

after much hunting i think i have figured it out
the first two hex are the odometer, the remain two hex are the inverse check sum
i went hunting with google and found a few things out.


..............................................................................
Mitsubishi Outlander yazaki c86 2012...and similar

4C 07 B3 F8 is 59776 KM
4C 07 -> 07 4C-> HEX->DEC x32 = ori milage

CS
4C + B3 = FF
07 + F8 = FF

Milage writen in adress 0-3F



Its simple but many calcs no calculate CS
..............................................................................
HEX Invertor, original on left, inverted on right


0-F
1-E
2-D
3-C
4-B
5-A
6-9
7-8
8-7
9-6
A-5
B-4
C-3
D-2
E-1
F-0
..............................................................................


you’ll notice the characters 33 85 CC 7A repeated 8 times. This is the major odometer value in HEX. The numbers are actually the HEX invert of each other, and act like a checksum. A HEX lookup table, which is 0-F and F-0 backward is used to determine the inverse of each character.

For example, a “3” will be inverted as “C”, and 8” inverted as “7” and “5” inverted as “A”.

Therefore the only characters that store actual information are the first two HEX digits, 33 and 85.

To decode, simply convert the number to decimal using a hex to decimal converter, and then multiply by 16 to give you the odometer reading in kilometers. I got 211,024km.

Using this method of calculation, I need the new cluster to read 314K, so I can divide it by 16 and convert it to HEX to give me the base value in the odometer dump. This value, 4C CF will then have a checksum of B3 30, which I will write to the chip.

Now I know it’s not exactly accurate but close enough, because there is a minor incremental value that I haven’t decoded. I made an excel sheet to help me convert the numbers.

User avatar
Bad-Teo
Posts: 275
Joined: 22 Dec 2019, 12:58
Location: Украина

Re: Dashboards instruction / Инструкция по работе с приборками

Post by Bad-Teo » 17 May 2021, 20:03

All this is interesting. But the exact calculation is considered differently. Simple standards are not applicable. The exact calculation is actually very difficult.

Post Reply