Test report version 0.5b with 80cell i-miev/c-zero/ion

[gljiutrhiuge5]

Hello. Thanks for the tool. I tested it quickly on a 80cell i-miev based car with OpenPort 2.0.

Report:
1. The SoC calculation does not seem to be correct in my case. It had shown over 100% SoC and that is of course not possible. Probably some calculation difference because of 80cell and not 88cell.
OBSZero is known to do good SoC calculation on those cars. Maybe you would like to to take a look at the code and how its calculated there: https://github.com/DavidCecil50/OBDZero/tree/Android11
Also the SoC calculation for the high capacity NMC cells is build in that app.

2. SoH was at 0 instead of some value.

3. You miss a model in supported vehicles. The PSA group have released next to the C-Zero also the Peugeot iOn . Could you also add the manufacturer of the cars to the tool where it supports now more then 1 manufacturer? Here example how this could look like:
* Nissan Leaf ZE0
* Nissan Leaf AZE0
* Nissan Leaf ZE1
* Mitsubishi i-Miev / Minicab / Citroën C-Zero / Peugeot iOn
* Mitsubishi Outlander PHEV

4. I have read often that the Nissan eNV200 is nearly the same like the Leaf. Would you also like to add it to the list?

5. Buttons HV BATTERY and EV/HEV did not worked. I think this is expected to be this way?

6. Could you add ETACS configuration ability (like in MMCodingWriter - but that does not support imiev) to disable TPMS, the door beeping sound and other typical things people often like to change in the ETACS?

[kolyandex]

1. For now support for Imiev is poor.
4. Env same as leaf aze0
5. Will work if Nissan car selected
6. No

[gljiutrhiuge5]

Second test. Now on a different car that had error code popped up.
The imiev car is form 2014. ABS-lamp was on.
I connected OpenPort adapter and checked with EvUtil but i did not see any error that would cause a light to go on. I closed EvUtil and turned on MUT-3 SE and that directly displayed the error code that caused the light to go on.
EvUtil is for some reason not able to read stored B**** error codes.

[kolyandex]

Probably abs on k-line? Evutil works only for CAN ECUs