kolyandex's forum

Hello. I have a iMiev with TPMS enabled and missing TPMS sensors in the tire and i would like to disable it. The actual version from MMCodingWriter 2.3 does not support the ECU because you figured out how the ECU works later then MMCodingWriter 2.3 from the year 2020.
Now you know everything about the EV-ECU and offer even modified firmware versions for it: viewtopic.php?f=22&t=869

Would be great if you could release a updated version that support this EV-ECU.
Then i would be able to follow this howto in a imiev car https://www.evoxforums.com/threads/how- ... ms.403879/

Reading the forum with translation is somewhat complicated, but now i have found this:
viewtopic.php?f=17&t=90&start=10#p2269

Summery in english: In the year 2020 someone already asked you to add iMiev support in MMCodingWriter. The person was using the Diagbox hardware with your driver you made J2534 capable. Sadly you told back then, that you are not planing in 2020 to add iMiev support to the MMCodingWriter.
I hope the situation have changed since then and you would add support for the iMiev in MMCodingWriter. I would really like to do a simple thing with MMCodingWriter and disable TPMS.

You can use MUT 3 with my driver.

Now i have spend much time and money and got MUT-3 because of your recommendation.
MUT-3 SE can not enable/disable TPMS. Why have you told me to use MUT-3? Or am i missing something here? Would be great if you could tell me how i can get TPMS disabled.

Probably tpms hardcoded in some ecus. Newer working with Imiev for that.