I can still connect with OpenPort2.0

All about MMCodingWriter in english

Moderator: kolyandex

Post Reply
george
Posts: 9
Joined: 09 Dec 2019, 03:32

I can still connect with OpenPort2.0

Post by george » 20 Nov 2020, 12:56

Hi ,
I can still connect with OpenPort2.0, the following message appears: "Device not connected.Unable to start exchange session".
I tried another cable but without result. the device may have broken?

Do you have any idea what could have happened?

Screenshot 2020-11-20 115755.png
You do not have the required permissions to view the files attached to this post.

User avatar
kolyandex
Администратор
Posts: 1287
Joined: 08 Dec 2019, 13:33
Location: Novosibirsk
Contact:

Re: I can still connect with OpenPort2.0

Post by kolyandex » 20 Nov 2020, 15:37

Check drivers for openport
In backup we trust.

george
Posts: 9
Joined: 09 Dec 2019, 03:32

Re: I can still connect with OpenPort2.0

Post by george » 22 Nov 2020, 05:43

I installed the drivers and it works very well. Thank you.

sawalhy
Posts: 4
Joined: 20 Feb 2021, 12:44

Re: I can still connect with OpenPort2.0

Post by sawalhy » 20 Feb 2021, 12:50

How do I run Mitsubishi MUT-III on OpenPort 2.0

george
Posts: 9
Joined: 09 Dec 2019, 03:32

Re: I can still connect with OpenPort2.0

Post by george » 21 Feb 2021, 07:26

from internet (serch open port 2.0 driver) or from this forum

Post Reply