CANNOT SWITCH SERVICE REMINDER BACK ON

All about MMCodingWriter in english

Moderator: kolyandex

Post Reply
Captain
Posts: 4
Joined: 17 Jan 2021, 23:29

CANNOT SWITCH SERVICE REMINDER BACK ON

Post by Captain » 18 Feb 2021, 20:30

HI Guys,
I get a dtc error code U1195 when trying to turn back on the service reminder, comes up coding not complete.
Any one have any ideas on this at all.

User avatar
Bad-Teo
Posts: 275
Joined: 22 Dec 2019, 12:58
Location: Украина

Re: CANNOT SWITCH SERVICE REMINDER BACK ON

Post by Bad-Teo » 18 Feb 2021, 20:38

Hi. Return as it was.

Image

And change the values ​​through MMCodingWriter. You can choose any time period.

Image

Captain
Posts: 4
Joined: 17 Jan 2021, 23:29

Re: CANNOT SWITCH SERVICE REMINDER BACK ON

Post by Captain » 19 Feb 2021, 00:13

Hi Bad Tee,
Many thanks for your reply, I have tried both of these and it does not work. Do i have to turn the car on and drive it to reset service reminder as well?

User avatar
Bad-Teo
Posts: 275
Joined: 22 Dec 2019, 12:58
Location: Украина

Re: CANNOT SWITCH SERVICE REMINDER BACK ON

Post by Bad-Teo » 19 Feb 2021, 01:01

Not. While the program is running, the car ignition must be switched on.

Captain
Posts: 4
Joined: 17 Jan 2021, 23:29

Re: CANNOT SWITCH SERVICE REMINDER BACK ON

Post by Captain » 19 Feb 2021, 01:06

Many thanks again,
Just final question what is the difference between varaint and custom coding. Does it make a difference which one i write to car.

User avatar
Bad-Teo
Posts: 275
Joined: 22 Dec 2019, 12:58
Location: Украина

Re: CANNOT SWITCH SERVICE REMINDER BACK ON

Post by Bad-Teo » 19 Feb 2021, 01:09

Service reminder
1. Enter preferred value and press "Write". If you're getting error, then need to turn on this option in ETACS variant coding (Service reminder schedule table)

Google translator :)

The maintenance reset interval is described in the operating instructions, everything is simple there.
Zeroing can be performed with the ignition off or
switched on operating mode OFF.
1. The maintenance monitoring display window is displayed by pressing the button several times toggle in the information window.
2. Hold the shift button for at least 2 seconds until the spanner symbol does not appear or flash. If a no button is pressed for about 10 seconds, the display will show the previous reading. After the symbol starts flashing, press the button multifunction display to replace “” with the inscription "CLEAR". The display will show the number months and mileage remaining until the next maintenance.

User avatar
Bad-Teo
Posts: 275
Joined: 22 Dec 2019, 12:58
Location: Украина

Re: CANNOT SWITCH SERVICE REMINDER BACK ON

Post by Bad-Teo » 19 Feb 2021, 01:19

Captain wrote:
19 Feb 2021, 01:06
Many thanks again,
Just final question what is the difference between varaint and custom coding. Does it make a difference which one i write to car.

With each variant entry, custom is reset to factory defaults. Therefore, save custom and restore custom after each variant change.
The variant settings are changed in the program. custom can be changed through the magnet, if it supports the functionality.

Post Reply