Fail after editing ETACS

All about MMCodingWriter in english

Moderator: kolyandex

Post Reply
Planarian17
Posts: 3
Joined: 17 Feb 2022, 15:40

Fail after editing ETACS

Post by Planarian17 » 19 Feb 2022, 12:54

My car is a MY2020 L200/Triton with the 4N15 engine.

I can connect to the car using a bluetooth ELM237 V1.5 connector, but i cannot write the Variant/Custom after editing. it would always say that writing failed. Has anyone got a fix for this? could it be an adapter issue? Thanks!

User avatar
kolyandex
Администратор
Posts: 1286
Joined: 08 Dec 2019, 13:33
Location: Novosibirsk
Contact:

Re: Fail after editing ETACS

Post by kolyandex » 19 Feb 2022, 18:15

Use tactrix openport.
In backup we trust.

Planarian17
Posts: 3
Joined: 17 Feb 2022, 15:40

Re: Fail after editing ETACS

Post by Planarian17 » 23 Feb 2022, 12:19

kolyandex wrote:
19 Feb 2022, 18:15
Use tactrix openport.

Hey, i've tried it usding tactrix openport and it works. But do you know if i can reset/get rid of service reminder alarm on the car? thanks!

Planarian17
Posts: 3
Joined: 17 Feb 2022, 15:40

Re: Fail after editing ETACS

Post by Planarian17 » 23 Feb 2022, 17:06

Ignore that, i've found the post explaining it.

Another question though, can i change the tyre circumference from the preset options to something custom? thanks!

DannyPt
Posts: 1
Joined: 24 Mar 2022, 09:20

Re: Fail after editing ETACS

Post by DannyPt » 24 Mar 2022, 12:11

Were you able to solve the issue with the ELM327?
I've also aquired one but it is giving me the fail issue when i try to write the variant.

Or can you tell me where you ahve bougth the tactrix openport?
Because i've searched for it al it appear one for $170 and that's not for me.
In aliexpress there are some for around $30-$40

Post Reply