Software not connecting to ELM327 BLUETOOTH
Posted: 23 Jun 2022, 23:56
Hello guys! First of all, thanks for giving us an opportunity to change our cars settings in an easier way! Congratulations for the software development!
I am trying to connect my ELM327 bluetooth adapter with the MMCondingWriter just to change some configs in my ETACS, but I'm having some problems... the youtube tutorials that I have watched, I learned that I have set this values in MMCodingWriter to be able to successfully connect to my ELM327 BT adapter (ELM parameters: port - auto; timeout - 150; baud - auto AND write blindly = On), I'm trying to connect with this configuration and many other possible configurations (for example: changing the boud of COM ports etc) but i am not able to connect anyway, the software seems like an infinite attempt, with the green bar scrolling forever and nothing appears in the output console. BUT when I change the COM port configuration (Autoboud option) from "auto marked" to "auto NOT marked" and chose the exit COM5 port, the software try to connect to my elm327 and show that message "ELM not found on COM5; Unable to start exchange session". Is there some configuration that I'm missing? My car may not be compatible with the software? Can someone help me with this problem I will be very thankful
Here some more detailed information about my models and equipment versions:
My OBD2 adapter: ELM327 BLUETOOTH V1.5 DOUBLE PCB CHIP PIC18f25k80 OBD2
My car: MITSUBISHI LANCER 2015/2015 AT (CVT) 2.0 4B11
My computer: Notebook DELL Inspiron 15 3567 - Windows 10 Pro 64Bits
I am trying to connect my ELM327 bluetooth adapter with the MMCondingWriter just to change some configs in my ETACS, but I'm having some problems... the youtube tutorials that I have watched, I learned that I have set this values in MMCodingWriter to be able to successfully connect to my ELM327 BT adapter (ELM parameters: port - auto; timeout - 150; baud - auto AND write blindly = On), I'm trying to connect with this configuration and many other possible configurations (for example: changing the boud of COM ports etc) but i am not able to connect anyway, the software seems like an infinite attempt, with the green bar scrolling forever and nothing appears in the output console. BUT when I change the COM port configuration (Autoboud option) from "auto marked" to "auto NOT marked" and chose the exit COM5 port, the software try to connect to my elm327 and show that message "ELM not found on COM5; Unable to start exchange session". Is there some configuration that I'm missing? My car may not be compatible with the software? Can someone help me with this problem I will be very thankful
Here some more detailed information about my models and equipment versions:
My OBD2 adapter: ELM327 BLUETOOTH V1.5 DOUBLE PCB CHIP PIC18f25k80 OBD2
My car: MITSUBISHI LANCER 2015/2015 AT (CVT) 2.0 4B11
My computer: Notebook DELL Inspiron 15 3567 - Windows 10 Pro 64Bits