Instruction
Moderator: kolyandex
Instruction
!!!SAVE ORIGINAL CODING FILES IN MULTIPLE PLACES!!!
https://youtu.be/qSAZenIZF-w
You can change language to english in list in top right corner.
2+ cores CPU for ELM327/ELS27 and Mini-VCI (core i3 and higer)
Do everything with the ignition on and stopped engine!
https://youtu.be/qSAZenIZF-w
You can change language to english in list in top right corner.
2+ cores CPU for ELM327/ELS27 and Mini-VCI (core i3 and higer)
Do everything with the ignition on and stopped engine!
In backup we trust.
Re: Instruction
Since version 2.3 internal editor available. Just connect to car, press "Editor" button, edit and press "Write". If something wrong use external MUT Coding Mitsubishi
Save/write coding
0. Install driver for Mini-VCI (if you have that adapter) https://cloud.kolyandex.su/index.php/s/egHeO7yJgZIogZx
1. Take your supported adapter viewtopic.php?f=6&t=81
2. Connect to the car, run MMCodingWriter
3. Select your adapter and ECUs in settings tab, then press "Connect"
4. After successfull connection press save button in Engine/ETACS tab.
5. Change kon/cuf file in MUT Coding Mitsubishi then save it with another name (name are don't care).
6. Open new file and press Write.
Save/write coding
0. Install driver for Mini-VCI (if you have that adapter) https://cloud.kolyandex.su/index.php/s/egHeO7yJgZIogZx
1. Take your supported adapter viewtopic.php?f=6&t=81
2. Connect to the car, run MMCodingWriter
3. Select your adapter and ECUs in settings tab, then press "Connect"
4. After successfull connection press save button in Engine/ETACS tab.
5. Change kon/cuf file in MUT Coding Mitsubishi then save it with another name (name are don't care).
6. Open new file and press Write.
In backup we trust.
Re: Instruction
DTCs reading
1. Press "Read DTC"
2. If DTCs exists, press "Erase DTC"
Also you can read errors history with odometer values when it happens. Read button in errors history group.
You can't erase it.
1. Press "Read DTC"
2. If DTCs exists, press "Erase DTC"
Also you can read errors history with odometer values when it happens. Read button in errors history group.
You can't erase it.
In backup we trust.
Re: Instruction
Seat belt indicator/beezer
Select "Indicator only" checkbox and press "Write".
Change ETACS / Engine VIN
1. Enter preferred VIN and press write.
Change immo PIN
1. Enter old and new pin and press write. You have only 5 attempt with wrong pin before immo locked for 15 minutes. Accepts only [0-9][A-F] chars.
Select "Indicator only" checkbox and press "Write".
Change ETACS / Engine VIN
1. Enter preferred VIN and press write.
Change immo PIN
1. Enter old and new pin and press write. You have only 5 attempt with wrong pin before immo locked for 15 minutes. Accepts only [0-9][A-F] chars.
In backup we trust.
Re: Instruction
Engine learned values reset
1. Make sure your throttle are clean!
2. Press "Reset calibrations"
CVT ATF degradation level reset
1. If you are see 0, means degradation already resetted or this function are not supported.
2. Press "ATF Reset"
1. Make sure your throttle are clean!
2. Press "Reset calibrations"
CVT ATF degradation level reset
1. If you are see 0, means degradation already resetted or this function are not supported.
2. Press "ATF Reset"
In backup we trust.
Re: Instruction
Service reminder
1. Enter preferred value and press "Write". If you're getting error, then need to turn on this option in ETACS variant coding (Service reminder schedule table)
1. Enter preferred value and press "Write". If you're getting error, then need to turn on this option in ETACS variant coding (Service reminder schedule table)
In backup we trust.
Re: Instruction
Important things about ELM327
NOT RECOMMENDED TO USE BLUETOOTH ELM WITH ETACS A600+
If you're getting error after ELM found in log, means ELM are fake and can't be used with this software. Also if connection are success, but VIN and coding fields are empty.
1. Make sure that ELM connected and ready to work https://cloud.kolyandex.su/index.php/s/IV4GR9j0ovl2XaD
2. For some operations need to tune timeout value, as example, for write variant coding timeout must be 150, for SAS calibration - 650.
3. Enjoy perfect work with ELM
NOT RECOMMENDED TO USE BLUETOOTH ELM WITH ETACS A600+
If you're getting error after ELM found in log, means ELM are fake and can't be used with this software. Also if connection are success, but VIN and coding fields are empty.
1. Make sure that ELM connected and ready to work https://cloud.kolyandex.su/index.php/s/IV4GR9j0ovl2XaD
2. For some operations need to tune timeout value, as example, for write variant coding timeout must be 150, for SAS calibration - 650.
3. Enjoy perfect work with ELM
In backup we trust.
Re: Instruction
0-100 meter
You do not have the required permissions to view the files attached to this post.
In backup we trust.