Instruction

All about MMCodingWriter in english

Moderator: kolyandex

Locked
User avatar
kolyandex
Администратор
Posts: 1286
Joined: 08 Dec 2019, 13:33
Location: Novosibirsk
Contact:

Instruction

Post by kolyandex » 11 Apr 2020, 07:19

!!!SAVE ORIGINAL CODING FILES IN MULTIPLE PLACES!!!

https://youtu.be/qSAZenIZF-w

You can change language to english in list in top right corner.

2+ cores CPU for ELM327/ELS27 and Mini-VCI (core i3 and higer)

Do everything with the ignition on and stopped engine!
In backup we trust.

User avatar
kolyandex
Администратор
Posts: 1286
Joined: 08 Dec 2019, 13:33
Location: Novosibirsk
Contact:

Re: Instruction

Post by kolyandex » 11 Apr 2020, 07:25

Since version 2.3 internal editor available. Just connect to car, press "Editor" button, edit and press "Write". If something wrong use external MUT Coding Mitsubishi

Save/write coding

0. Install driver for Mini-VCI (if you have that adapter) https://cloud.kolyandex.su/index.php/s/egHeO7yJgZIogZx
1. Take your supported adapter viewtopic.php?f=6&t=81
2. Connect to the car, run MMCodingWriter
3. Select your adapter and ECUs in settings tab, then press "Connect"
4. After successfull connection press save button in Engine/ETACS tab.
5. Change kon/cuf file in MUT Coding Mitsubishi then save it with another name (name are don't care).
6. Open new file and press Write.
In backup we trust.

User avatar
kolyandex
Администратор
Posts: 1286
Joined: 08 Dec 2019, 13:33
Location: Novosibirsk
Contact:

Re: Instruction

Post by kolyandex » 11 Apr 2020, 07:27

DTCs reading
1. Press "Read DTC"
2. If DTCs exists, press "Erase DTC"

Also you can read errors history with odometer values when it happens. Read button in errors history group.
You can't erase it.
In backup we trust.

User avatar
kolyandex
Администратор
Posts: 1286
Joined: 08 Dec 2019, 13:33
Location: Novosibirsk
Contact:

Re: Instruction

Post by kolyandex » 11 Apr 2020, 07:33

Seat belt indicator/beezer
Select "Indicator only" checkbox and press "Write".

Change ETACS / Engine VIN
1. Enter preferred VIN and press write.

Change immo PIN
1. Enter old and new pin and press write. You have only 5 attempt with wrong pin before immo locked for 15 minutes. Accepts only [0-9][A-F] chars.
In backup we trust.

User avatar
kolyandex
Администратор
Posts: 1286
Joined: 08 Dec 2019, 13:33
Location: Novosibirsk
Contact:

Re: Instruction

Post by kolyandex » 11 Apr 2020, 07:36

Engine learned values reset
1. Make sure your throttle are clean!
2. Press "Reset calibrations"

CVT ATF degradation level reset
1. If you are see 0, means degradation already resetted or this function are not supported.
2. Press "ATF Reset"
In backup we trust.

User avatar
kolyandex
Администратор
Posts: 1286
Joined: 08 Dec 2019, 13:33
Location: Novosibirsk
Contact:

Re: Instruction

Post by kolyandex » 11 Apr 2020, 07:37

Service reminder
1. Enter preferred value and press "Write". If you're getting error, then need to turn on this option in ETACS variant coding (Service reminder schedule table)
In backup we trust.

User avatar
kolyandex
Администратор
Posts: 1286
Joined: 08 Dec 2019, 13:33
Location: Novosibirsk
Contact:

Re: Instruction

Post by kolyandex » 11 Apr 2020, 07:45

Important things about ELM327

NOT RECOMMENDED TO USE BLUETOOTH ELM WITH ETACS A600+

If you're getting error after ELM found in log, means ELM are fake and can't be used with this software. Also if connection are success, but VIN and coding fields are empty.

1. Make sure that ELM connected and ready to work https://cloud.kolyandex.su/index.php/s/IV4GR9j0ovl2XaD
2. For some operations need to tune timeout value, as example, for write variant coding timeout must be 150, for SAS calibration - 650.
3. Enjoy perfect work with ELM
In backup we trust.

User avatar
kolyandex
Администратор
Posts: 1286
Joined: 08 Dec 2019, 13:33
Location: Novosibirsk
Contact:

Re: Instruction

Post by kolyandex » 11 Apr 2020, 07:45

0-100 meter
Zy8dqpvvjyI.jpg
You do not have the required permissions to view the files attached to this post.
In backup we trust.

Locked