Dear Nikolai,
I'm a member of the Mitsubishi Club in Romania, and i've been trying to use your software with a tactrix adapter in order to activate some functions.
On most Etacs things are ok, but on some it won't work. I'll make a list for you, maybe you can investigate and help:
On all cars i was trying to activate door lock on speed and unlock on IG OFF & crash. I always got error 0x31 request out of range.
Eclipse Cross 2018, 1.5 (4B40) MT - ETACS 8637B490, i can write KON but can't write CUF
Lancer 2008, 1.5 Petrol, MT- ETACS 8637A318, can't write KON
Lancer 2008, 2.0 Diesel, MT, BSY/BWC (3H41) - ETACS 8637A465, i can write KON but can't write CUF
Lancer 2008, 2.0 Diesel, MT, BSY/BWC (3H41) - ETACS 8637A318, can't write KON
Lancer 2008, 1.8 Petrol, MT- ETACS 8637A465, can't write KON
For other cars everything works properly.
If you need the KON files or KON+CUF i can send them to you.
I've checked here: http://mmc-autoelectric.org.ua/etacs/11 ... i-funktsii and except for the Eclipse ETACS, which is not in the list, all others should've worked.
Let me know if you can do something about this.
Thank you!
PS. i'm using this driver for tactrix: https://www.tactrix.com/index.php?optio ... &Itemid=61
ETACS issues
Moderator: kolyandex
Re: ETACS issues
Hi. This is not software issues, but only wrong selected functions. Try another values.
In backup we trust.
Re: ETACS issues
I did. I've even tried them one by one and the same error.
I did about 10 cars, but only with those ETACS mentioned here i had problems.
In KON i modified:
70 - Door unlock by IG lock customize - enabled
101 - Auto door lock/unlock - crash unlock + speed lock
172 - Door unlock mode - Customize Enabled
I wrote/tried to write KON.
If KON was successful i got the new CUF and modified:
14 Auto door lock by vehicle speed - Enable
15 - Auto door unlock - Always lock pos (enabled by ignition)
16 - Doors unlock mode - All doors unlock
As i said i did the exact same steps on all cars.
I did about 10 cars, but only with those ETACS mentioned here i had problems.
In KON i modified:
70 - Door unlock by IG lock customize - enabled
101 - Auto door lock/unlock - crash unlock + speed lock
172 - Door unlock mode - Customize Enabled
I wrote/tried to write KON.
If KON was successful i got the new CUF and modified:
14 Auto door lock by vehicle speed - Enable
15 - Auto door unlock - Always lock pos (enabled by ignition)
16 - Doors unlock mode - All doors unlock
As i said i did the exact same steps on all cars.
Re: ETACS issues
Maybe it's an error of mut coding for these etacs?
Re: ETACS issues
can you take a look at the files, maybe you can tell me what's wrong?
You do not have the required permissions to view the files attached to this post.
Re: ETACS issues
Hello.
1.Is it possible to off average fuel consumption 4 h automatic reset?
2. Can i change odometer from ml to km?
Car is outlander sport 2018
1.Is it possible to off average fuel consumption 4 h automatic reset?
2. Can i change odometer from ml to km?
Car is outlander sport 2018