ETACS issues

All about MMCodingWriter in english

Moderator: kolyandex

Post Reply
spinner
Posts: 4
Joined: 09 May 2020, 21:56

ETACS issues

Post by spinner » 15 Jun 2020, 13:15

Dear Nikolai,
I'm a member of the Mitsubishi Club in Romania, and i've been trying to use your software with a tactrix adapter in order to activate some functions.
On most Etacs things are ok, but on some it won't work. I'll make a list for you, maybe you can investigate and help:

On all cars i was trying to activate door lock on speed and unlock on IG OFF & crash. I always got error 0x31 request out of range.

Eclipse Cross 2018, 1.5 (4B40) MT - ETACS 8637B490, i can write KON but can't write CUF
Lancer 2008, 1.5 Petrol, MT- ETACS 8637A318, can't write KON
Lancer 2008, 2.0 Diesel, MT, BSY/BWC (3H41) - ETACS 8637A465, i can write KON but can't write CUF
Lancer 2008, 2.0 Diesel, MT, BSY/BWC (3H41) - ETACS 8637A318, can't write KON
Lancer 2008, 1.8 Petrol, MT- ETACS 8637A465, can't write KON

For other cars everything works properly.

If you need the KON files or KON+CUF i can send them to you.

I've checked here: http://mmc-autoelectric.org.ua/etacs/11 ... i-funktsii and except for the Eclipse ETACS, which is not in the list, all others should've worked.

Let me know if you can do something about this.
Thank you!

PS. i'm using this driver for tactrix: https://www.tactrix.com/index.php?optio ... &Itemid=61

User avatar
kolyandex
Администратор
Posts: 338
Joined: 08 Dec 2019, 13:33
Location: Novosibirsk
Contact:

Re: ETACS issues

Post by kolyandex » 15 Jun 2020, 13:25

Hi. This is not software issues, but only wrong selected functions. Try another values.
In backup we trust.

spinner
Posts: 4
Joined: 09 May 2020, 21:56

Re: ETACS issues

Post by spinner » 15 Jun 2020, 13:46

I did. I've even tried them one by one and the same error.
I did about 10 cars, but only with those ETACS mentioned here i had problems.

In KON i modified:
70 - Door unlock by IG lock customize - enabled
101 - Auto door lock/unlock - crash unlock + speed lock
172 - Door unlock mode - Customize Enabled

I wrote/tried to write KON.

If KON was successful i got the new CUF and modified:
14 Auto door lock by vehicle speed - Enable
15 - Auto door unlock - Always lock pos (enabled by ignition)
16 - Doors unlock mode - All doors unlock

As i said i did the exact same steps on all cars.

spinner
Posts: 4
Joined: 09 May 2020, 21:56

Re: ETACS issues

Post by spinner » 16 Jun 2020, 19:29

Maybe it's an error of mut coding for these etacs?

User avatar
kolyandex
Администратор
Posts: 338
Joined: 08 Dec 2019, 13:33
Location: Novosibirsk
Contact:

Re: ETACS issues

Post by kolyandex » 16 Jun 2020, 19:30

No
In backup we trust.

spinner
Posts: 4
Joined: 09 May 2020, 21:56

Re: ETACS issues

Post by spinner » 17 Jun 2020, 13:58

can you take a look at the files, maybe you can tell me what's wrong?
You do not have the required permissions to view the files attached to this post.

Post Reply