FAQ in english

All about J2534 driver
Все о драйвере J2534
User avatar
kolyandex
Администратор
Posts: 280
Joined: 08 Dec 2019, 13:33
Location: Novosibirsk
Contact:

Re: FAQ in english

Post by kolyandex » 23 May 2020, 10:04

kernel wrote:
22 May 2020, 15:48
Only errors are asc systm issue and 4wd issue, However those errors were there before key programming. Is there an option in the MUT III to check to see if the key is present and working? should I try programming again? just not sure if that will work as it would be considered a used key now and it would be able to be reprogrammed, or am I incorrect?
Hm. Try to manually turn on starter relay, if all ok, engine will started.
In backup we trust.

kernel
Posts: 6
Joined: 08 May 2020, 16:55

Re: FAQ in english

Post by kernel » 28 May 2020, 14:54

kolyandex wrote:
23 May 2020, 10:04
kernel wrote:
22 May 2020, 15:48
Only errors are asc systm issue and 4wd issue, However those errors were there before key programming. Is there an option in the MUT III to check to see if the key is present and working? should I try programming again? just not sure if that will work as it would be considered a used key now and it would be able to be reprogrammed, or am I incorrect?
Hm. Try to manually turn on starter relay, if all ok, engine will started.
It now turns over, I had to trace the starter line and found the issue, It had nothing to do with the driver or MUT III. Thank you for all your help.

Post Reply