MINI VCI J2534 Driver for MUT 3

All about MUT driver
Все о драйвере MUT
Post Reply
CEDO1993
Posts: 3
Joined: 28 Mar 2023, 01:04

MINI VCI J2534 Driver for MUT 3

Post by CEDO1993 » 28 Mar 2023, 06:08

Hi there,

I'm about to replace my FC1JC Transmission with another 2nd one.
I need the MUT 3 in order to save the pre existing values and then adapt the new one to the CVT ECU.

Could you please let me know if the MIni VCI J2534 will do or should i get another j2534 adapter and also if i should purchase the full software for MUT 3 drivers.

Also if i can use the Mini VCI J2534 with MUT3, could you please explain how i can installed the driver for MUT 3.

Happy to pay for services for a reasonable fee

Thank you

User avatar
kolyandex
Администратор
Posts: 1287
Joined: 08 Dec 2019, 13:33
Location: Novosibirsk
Contact:

Re: MINI VCI J2534 Driver for MUT 3

Post by kolyandex » 28 Mar 2023, 06:31

No need to rewrite existing calibrations for another transmission assembly. Better way is replace tcm ecu also from new transmission.
In backup we trust.

CEDO1993
Posts: 3
Joined: 28 Mar 2023, 01:04

Re: MINI VCI J2534 Driver for MUT 3

Post by CEDO1993 » 28 Mar 2023, 11:36

kolyandex wrote:
28 Mar 2023, 06:31
No need to rewrite existing calibrations for another transmission assembly. Better way is replace tcm ecu also from new transmission.
Thanks a lot for the info Kolyandex However i check online that it says if valve body and cvt ecuy is replaced it'll need initializing.

Could it mean if it's a straight swap it should be fine. I've post the link for the info in the bottom for reference.

Thanks Again.

Link : https://testing-public.carmd.com/Tsb/Do ... /520065644

User avatar
kolyandex
Администратор
Posts: 1287
Joined: 08 Dec 2019, 13:33
Location: Novosibirsk
Contact:

Re: MINI VCI J2534 Driver for MUT 3

Post by kolyandex » 28 Mar 2023, 11:39

In case of change valve/mechatronic assembly you should write new calibrations which came with new assembly on CD disk. Otherwise you cant do anything to improve work.
In backup we trust.

CEDO1993
Posts: 3
Joined: 28 Mar 2023, 01:04

Re: MINI VCI J2534 Driver for MUT 3

Post by CEDO1993 » 29 Mar 2023, 06:03

kolyandex wrote:
28 Mar 2023, 11:39
In case of change valve/mechatronic assembly you should write new calibrations which came with new assembly on CD disk. Otherwise you cant do anything to improve work.
Thanks Kolyandex. How do i proceed to get the Mini VCI J2534 to work on MUT 3.
Happy to pay you and get it done asap.

Please let me know.
Thanks

Post Reply